ARINC818A2D is a high-performance ARINC818 protocol video transmission equipment, with 2-way FC optical fiber interface (1 set of redundant interfaces), 1-way DVI interface and 1-way HDMI interface. The port rate supports 1.0625gbps, 2.125gbps, 3.1875gbps, 4.25gbps and user-defined non-standard transmission speed. ARINC818A2D receives FC video packets transmitted from optical fiber interface, parses FC packets according to ARINC818 protocol, and sends them to DVI or HDMI video interface. ARINC818A2D independent power supply, can adapt to a variety of simulation, test environment.
Features：
·Compliance with FC-FS, FC-AV, FC-ADVB protocol.
·Compliance with ARINC818 protocol.
·Support fiber communication Class1 and Class3 service.
·Support 2 FC interface inputs, 1 DVI interface output and 1 HDMI interface output.
·Support optical fiber communication 1.0625Gbps, 2.125Gbps, 3.1875Gbps, 4.25Gbps and user-defined non-standard transmission speed.
·According to the refresh cycle, the general supported resolutions are divided into the following two categorie
Refresh cycle:30 Hz
|
·Refresh cycle:30Hz |
||
|
1920×1080@30Hz |
1600×1200@30Hz |
1600×900@30Hz |
|
1280×1024@30Hz |
1024×768@30Hz |
800×600@30Hz |
|
600×480@30Hz |
||
Refresh cycle:60 Hz
|
·Refresh cycle:60Hz |
||
|
1920×1080@60Hz |
1600×900@60Hz |
1280×1024@60Hz |
|
1024×768@60Hz |
800×600@60Hz |
600×480@60Hz |
·Support resolution customization
·HDMI interface supports up to 2560 × 1440@30Hz Resolution (customizable)
· DVI interface supports up to 1920x1080@60Hz Resolution
·Support dynamic display resolution switching display
·Support RS422 interface communication
Application
ARINC818 protocol mainly used for real-time high-definition lossless image transmission between airborne devices. Now it has been successfully applied to a number of civil and military aircrafts. It will be one of the development directions of airborne video transmission bus in the future. ARINC818A2D uses FPGA chip to realize the high-speed real-time conversion of ARINC818 protocol and digital video interface DVI. It gives full play to the characteristics of FC network, such as high speed, high reliability and low delay. It can be applied to the video transmission between display and control platform, image processing, video acquisition and other nodes.
Technical Parameters
|
Environment parameters |
Operating Temperature : 0℃-50℃ |
|
Interface parameters |
Port number: 2 FC ports |
|
Port rate:1.0625Gpbs, 2.125Gpbs, 3.1875Gbps, 4.25Gpbs and user-defined non-standard transmission speed |
|
|
Port media: SFP (optical fiber) |
|
|
Video interface: 1 DVI interface, maximum resolution 1920x1080@60Hz resolving power 1 HDMI interface, maximum resolution 2560×1440@30Hz |
|
|
Other parameters |
Size:200mm (L)X135mm(D)x38mm(H) |
Order information
|
Product Names |
Model |
|
ARINC818A2D |
FZ-530204 |
